December 1, 2010
Architecture Billings Index Down In October

A leading indicator of U.S. construction activity fell below 50 in October as credit for building projects continues to be tight, suggesting a recovery in the non-residential sector will not begin until late next year at the earliest.

The Architecture Billings Index was down almost 2 points to 48.7 last month, according to the American Institute of Architects (AIA), an industry trade group. A separate index of project inquiries dipped to 61.7 from September's three-year high of 62.3.

Any number below 50 indicates contracting demand. Project inquiries tend to be higher than billings as multiple architecture firms compete for business.

"Reluctance from lending institutions to provide credit for construction projects and a sluggish economy are the main impediments to a revival of the design and construction industry," AIA Chief Economist Kermit Baker said.

The billings index had topped 50 in September, its first positive reading since January 2008, raising hopes for a turning point after a prolonged construction downturn.

Companies that sell into the sector have cited the index as evidence of a nascent recovery. They included Ingersoll-Rand Plc (IR.N) and Eaton Corp (ETN.N), whose CEO said last month the nonresidential sector was bottoming.

Most diversified industrial companies get at least some revenue from nonresidential construction, selling machinery used for erecting buildings, or components such as elevators or electrical and cooling systems.

A partial list includes Honeywell International Inc (HON.N), Tyco International Ltd (TYC.N), Johnson Controls Inc (JCI.N), Caterpillar Inc (CAT.N), Deere & Co (DE.N) and Terex Corp (TEX.N). European companies, like lock maker Assa Abloy (ASSAb.ST) also participate in the sector.

The index is widely seen as a leading indicator of activity about nine to 12 months in the future.

Its move back below 50 "suggests that the recovery will be slow and will likely exhibit volatility, and we do not expect non-residential construction to begin to recover until the end of 2011 at the earliest," J.P. Morgan analyst Ann Duignan said in a research note.

Duignan also listed CNH (CNH.N), Manitowoc (MTW.N), Oshkosh (OSK.N) and Terex (TEX.N) as having direct exposure to non-residential construction.

Source: Reuters, November 17, 2010

Steel Framing Alliance
1140 Connecticut Avenue
Suite 705
Washington, D.C. 20036
Phone +202.785.2022
Fax +202.785.3856
2011 Dues Renewal
SFA would like to wish all our members Merry Christmas, Happy Holidays and a Prosperous New Year!

CFSEI 2010 Tech Notes And Webinars – At A Glance

Technical Publications

  • Updated Technical Note on Welding of Cold-Formed Steel Framing
  • Updated Technical Note on Top Track Load Distribution Members
  • New Technical Note on Local and Distortional Elastic Buckling Loads and Moments for SSMA Stud Sections (publication expected this month)
  • New Technical Note on Steel Roof Deck Diaphragms on CFS Framing  (publication expected this month)
  • New Technical Note on Clip Angles Used in Cold-Formed Steel Construction  (publication expected this month)

Web-Based Seminars

  • Beginners Guide to the Direct Strength Method for Cold-Formed Steel Design
  • Cold-Formed Steel Design using the 2009 International Building Code
  • Cold-Formed Steel Connection Design: 2007 AISI and 2009 IBC

For more information on CFSEI resources, visit

Ambrose Engineering, Inc.
Cedarburg, WI
Caruso Construction Services,LLC.
Groveland, FL
GypSteel Ind
Niteroi, Brazil
Robert T. Haug
Lakeland, FL
Structural Wall Systems
Khobar, Saudi Arabia

January 12-15, 2011
NAHB International Builders' Show 2011
Orlando, FL More


February 7-8, 2011
STEEL Doing It Right
San Diego, CA More


May 23-24, 2011
MASFA Expo & CFSEI Annual Conference
Annapolis, MD



Renew 2011 Member Dues | Unsubscribe

Brought to you by the Steel Framing Alliance (SFA) on the first Wednesday of each month, February through December. Framework Online arms you with important news and commentary on the cold-formed steel (CFS) framing and construction industries.